TripleA Robotics Pass-through Module Cap

Occasionally you might want to do automatic tool change between e.g. an electrical tool and one that is not. This is when you want to install a Cap Module on the tool side (side B) of the non-electrical tool in order to protect the electrical module installed on the robot side (side A).

The Cap Modules are designed in such a way that the original gaskets of the opposite module in the robot side (side A) will seal to the Cap Module keeping the IP rating of the module, installed on the robot side (side A), intact.

Material: Surface-treated aluminium (Color tone may vary)
IP classification when engaged with matching pass-through module: Minimum IP54