Request for QuotePowerTag Energy 63A fits directly on the protective device with no impact on the switchboard size. Voltage and current are measured at the same point of the circuit.
Values measured in accordance with the IEC 61557-12 standard:
Energy
- Active energy (Class 1), total and partial (kWh)
Real-Time
- Phase-to-neutral and phase-to-phase voltage (V)
- Current per phase (A)
- Power factor
- Active power, total and per phase (W)
- Apparent power total (VA) Alarm
- Voltage loss
This PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, it is dedicated to 3P+N devices, rating less than or equal 63A. It has to be associated with a concentrator or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications.
It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of a power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized.
- PowerTag Energy 63A complies with IEC 61557-12 standard
- It is a PMD-I/DD/K55/1
- Performance category is Class 1
- Imax Maximum current is 63A
- Ib Base current is 10A
- Saturation current is 130A
- Ist Starting current is 40mA
- Un rated voltage are Phase-to-neutral 220VAC to 240VAC +/- 20% and Phase-to-phase 380VAC to 415VAC +/- 20%
- maximum consumption is below or equal to 2VA
- It can be either mounted on the top or the bottom of the protective device
- Product colour is white (RAL9003)
- Weight is 40g
- Degree of protection is IP20 and IK05
- Operating temperature is between -25°C to +60°C
- Storage temperature is between -40°C to +85°C
